Dealer Entry

Polystyrene Heat Plate Adhesive Mortar

PRODUCT CATALOGUE

PRODUCT DEFINITION

IŞIKLAR Thin Insulation plaster mortar is a long life plaster mortar with Chemical additive and cement-based and high performance and easy applicability

FIELDS OF APPLICATION

It is used with machine or hand in the interior and exterior facade of mineral based wall surfaces

PRINCIPLES OF APPLICATION

Preliminary preparation

  • After repairing broken, cracked surfaces with Işıklar Repair Mortar, a smooth surface must be obtained
  • The surface to be attached shall be purified from the materials like dust, dirt, grease and paint.
  • In the areas exposed to sun, wind and heat, the application area should be moistened.
Mixing Ratio: Resting Time Standby time of the mortar in the bucket
11-12 liters of water for 25kg Adhesive 5–10 minutes. Max. 1 - 2 hours
TECHNICAL SPECIFICATIONS
  • Reference standards: : EN 998-1 JULY 2011
  • Color: : White - GREY
  • Workability of the mortar Time : 15-20 minutes
  • Dry Bulk Density : CLASS LW ≤ 1300 kg / m³
  • ComPresssive Strength: CLASS CS II (1.5 - 5.0. N / mm²)
  • Bond strength : ≥ 0.09 N / mm²
  • Water Vapor Permeability Floors: µ≤ 40
  • Average heat conductivity: Class T2 ( ≤ 0,20 W/m.K )
  • Water absorption: : Class W1 C ≤ 0,40kg /m².h.½
  • Reaction to Fire Class : Class A1
  • Application Temperature : + 5 °C ile +35 °C arası
  • Consumption 1 cm Weight: 9-10 kg /m²
APPLICATION

Işıklar light plaster mortar mortar shall be added to a container containing clean and cold water in thefollowing ratio and is mixed with low speed mixer until plastic consistency is obtained. During mixture, formation of lumps should be prevented immediately.

  • The homogenous mixture is rested for 5-10 minutes and then is stirred again
  • The mortar should be used within maximum 3 hours without losing its workability
  • Glass-fiber mesh must be used over wall surfaces at the conjunction points like colon, beam, bond beam etc. and areas with highly fracture composing risks.
  • Glass-fiber mesh must be close to the surface as far as 1/3 rate of plaster thickness.
  • Last layer plaster application must be done after ( 24 – 48) subject to climate conditions.
  • Any long term waited dry down surfaces must be watered before applying last layer mortar application.
  • Any mortar with expired processing time cannot be used adding water or dry mixture.
  • Ladle life of mortar ( 1-2 hours).
POINTS TO CONSIDER
  • Avoid contact with eye, mouth and skin for containing cement.
  • Do not add any additives to mortar (sand, cement).
  • Do not make any applications beside specified guidelines and instructions.
  • Production date is the date stamped on the product
  • Batch and serial number is the same with the date of manufacture.
PACKAGING AND STORAGE
  • It should be kept in krapt bags of 25 Kg, on wooden pallets and the packing height shall be maximum 10 bags and in dry environments.
  • The bags which are not opened in appropriate storage conditions, must be consumed within 1 year
IŞIKLAR SOCIAL
ÜYESİ OLDUĞUMUZ KURULUŞLAR